Home >> Products >> Brake Assembly >> Hydraulic Brake Assembly

9" x 1 3/4" Trailer Hydraulic Riveted Brake Assembly

Hydraulic Trailer Brake

9 x 1.75 inch Drum

Trailer Brake Kit

1200 kgs

9” Hydraulic Brake

1450 kgs

Riveted Brake Shoe

Hydraulic Backing Plates


This 9 inch hydraulic trailer brake has two riveted brake shoes, every 9” hydraulic trailer brake kit has one left side brake and one right side brake. The max load of a single axle are 1200 kgs (15“-16” wheel) and 1450 kgs (13”-14” wheel), 2000 kgs for a tandem axles setup. 9 inch hydraulic backing plates usually fitted to 40mm Square and 45mm square axles. These 9” x 1.75” hydraulic brakes are the best selling products for marine trailers in Australia.


l  Requires Wheel Cylinder and hydraulic lines (sold separately).

l  E-coated backing plates resist wear and corrosion.

l  Riveted Brake shoe set – The brake linings are non-asbestos semi-metal.

l  Less ongoing maintenance.

l  These 9” hydraulic trailer brakes exchange with most axle brands including AL-KO, Dexter and many standard brakes.

l  Fully Assembled; Quick and easy installation.


Ø  Dimension: 9 inch x 1 3/4 inch              

Ø  Axle Capability: 1200 kg Axle (15”/ 16” Wheel), 1450 kg Axle (13” / 14” Wheel)

Ø  Mounting Flange Bolt Pattern: 4 bolt

Ø  Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH

Product Composition

²  9” x 1 3/4" Riveted Brake Shoe Kit x 1

²  E-Coated Back Plate x 1

²  Wheel Cylinder x 1

²  Long spring x 1

²  Short spring x 1