Home >> Products >> Brake Assembly >> Electric Brake Assembly

7" x 1 1/4" Trailer Electric Brake Assembly

Trailer Torsion axle

Manual Adjustment

7 x 1.25 inch drum

2200 lbs trailer axle

7" electric drum brake

7'' electric backing plate

7’’ trailer brake assemblies are usually installed to torsion axles with max capacity of 2.2k lbs . These brakes are mostly for light trailers which axles do not need leaf springs.


l  7 inch electric brakes are easy to install and control.

l  Needs only an electric brake controller to work.

l  E-coated backing plates resist corrosion.

l  Periodic manual adjustment required.

l  Brake mounting bolts are included.

l  Exchange with most trailer axles not over 2200 lbs, including Dexter, AL-KO and many others.


Ø  Dimension: 7 inch x 1 1/4 inch                          

Ø  Axle Capability: 2200 lbs Axle           

Ø  Mounting Flange Bolt Pattern: 4 bolts

Ø  Brake Fit: Left Hand / Driver Side / LH, Right Hand / Passenger Side / RH

Product Composition

Ø  7” x 1 1/4" Brake Shoe Set x 1

Ø  E-coat Backing Plate x 1

Ø  Round Magnet with White Wire x 1

Ø  Magnet Lever x 1

Ø  Returning Springs x 1

Ø  Adjuster x 1